VIDENT GODIAG GT100 AUTO TOOLS OBD II Break Out Box ECU Connector

Product Description GODIAG GT100 AUTO TOOLS OBD II Break Out Box ECU Connector GODIAG GT100 is a latest testing platform for OBDII protocol communication detection and ECU maintenance / diagnosis / programming / coding. It can convert the car OBD2 interface into 16 pin for signal detection and electrical level conversion. Able to connect the single modules or multiple modules of the vehicle. It can be connected with any diagnostic tool to tell whether the car communication is good or not. It can also supply power to the car when you change the battery to avoid the vehicle control module data being lost, automatically locked, the key remote control fails and the fault light turns on. Funxtion: Able to power the car when replacing the used battery. 1). Prepare battery A to supply power by connecting to No. 16 / 4 / 5 holes of Godiag GT100 & to the OBD2 diagnostic interface of the car. [Notice 1. Turn on the power switch of Godiag GT100. 2. Don’t turn on the ignition switch, don’t start the car] 2). Then replace the brand-new battery B with the used battery in the car, which will ensure that the car has fully power to prevent data loss and audio lock-up or the malfunction due to lack of power to the ECU control module. Package includes: 1pc x Host 1pc xOBD 2-in-1 extension cable 1pc xColored jumper cable 1pc xPower supply 12V 1pc xResistance 120 ohm 6pcs xBanana plug 24pcs xWire accessories, Dupont 2.54mm connector female pins Features OBDII Protocol Detector & Communication DetectionGODIAG GT100 device connect to the diagnostic tool, when the tool is communicating with the car, the LED indicator of corresponding protocol will light up or flash. Banana plug extension connectionExtend the car’s OBDII 16pin interface to tell you whether the OBDII interface connection is good or not, which is convenient for the test of OBDII interface voltage waveform. Convert OBD1 Diagnostic Interface To The Standard OBD2Use the connector to convert the OBD1 interface into obd2 interface according to the diagnostic interface communication protocol. Connect Multiple ECU Control ModulesCan connect multiple ECU control modules at the same time, which is convenient for the professional engineers to detect and maintain. When To Use The Extension CablesThe space of the diagnostic interface location is too narrow to connect to the diagnostic tool, or the user find that the diagnostic cable is not long enough during maintenance. It can be extended by 1.2 meters.